My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

INT(EN)

iglidur® tribo-tape liner, V400, mm

  • Extremely wear-resistant
  • Very media-resistant
  • Up to +200°C in the long-term
  • With adhesive tape up to +160°C in the long-term
  • Easily cut to size.
  • Optionally available with adhesive tape strips
Please observe our processing instructions.

Here are special tribo-tape widths request

Unsure whether it fits?

Product description
iglidur® tribo-tape V400
 
igus® tribo-tape liner is designed for the versatile lining of tribologically challenged surfaces and shapes, for optimising movement within machine beds, etc. At a thickness of only 0.5-1mm (including the adhesive tape + 0.21mm), very little space is needed. The tape is easily fabricated - simply cut with a pair of scissors - and the optional self-adhesive back give almost unlimited possibilities.
The iglidur® tribo-tape liner is also available with a self-adhesive tape for quick and easy installation.
The highly wear resistant and highly media and temperature-resistant iglidur® V400 tribo-tape has been proven in tests to be up to 10 times more wear resistant than special products for machine beds.
 

Borders of the area to be bonded with adhesive tape strips
 
There are limits to the adhesive strength of the pressure sensitive tape with which this tribo-tape is equipped. A number of environmental influences can affect the adhesive system, causing substrates to peel away, which would not occur in structural bonding.
High-strength adhesive bonds which can bear continuous load, can normally only be achieved with chemically reactive one or two-component adhesives. In such cases, adhesive, substrate and substrate pre-treatment must be carefully harmonised. The many combination potentials prevent us from providing precise instructions or giving recommendations here.
We want to point out explicitly that the iglidur® tribo-tape adhesive tape strips can only facilitate the installation and fixing of the tape. Experience shows that the adhesive strength of the tape decreases over time. igus is not liable for insufficiencies of an adhesive system based on adhesive tape strips.
 
  
Certificates and standards
RoHS compliant
According to 2011/65/EU (RoHS 2)
Technical data
Downloads

Other solutions


The terms "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" and "yes" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries. This is a non-exhaustive list of trademarks (e.g. pending trademark applications or registered trademarks) of igus GmbH or affiliated companies of igus in Germany, the European Union, the USA and/or other countries or jurisdictions.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH