igusigus-icon-cart(0)

Gears and Gear racks

The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.

Number of products 22

iguform S270 gears, mm

iguform S270 gears, mm

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet.

Calculate the service life now. Click here

Please note: for gears with feather key groove: 
no alignment to the tooth profile.
(Possible upon request)

Not found the right geometry? Click here

EUR 1.23/Pc.Cost-effective price break available onlineEUR 0.37/Pc. 100 Pc.

573 variant(s), of which:

igus-icon-lieferzeit
313 ready for shipping in 48 hours

igutek P360 gears, mm

igutek P360 gears, mm

  • Increased wear resistance
  • Good tribological specifications
  • Very tough.
  • Resistant to shock loads

Calculate the service life now. Click here


Please note: for gears with feather key groove: 
no alignment to the tooth profile.
(Possible upon request)


Not found the right geometry? Click here



EUR 1.42/Pc.Cost-effective price break available onlineEUR 0.48/Pc. 100 Pc.

570 variant(s), of which:

igus-icon-lieferzeit
312 ready for shipping in 48 hours

iguform A270 gears, mm

iguform A270 gears, mm
  • FDA-compliant
  • EU 10/2011-compliant
  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise

iguform S270 gear racks, mm

iguform S270 gear racks, mm
  • Low coefficient of friction
  • Low humidity absorption
  • Quiet


Calculate the service life now. Click here


Not found the right geometry? Click here

EUR 3.26/Pc.Cost-effective price break available onlineEUR 1.46/Pc. 100 Pc.

41 variant(s), of which:

igus-icon-lieferzeit
7 ready for shipping in 48 hours

xirodur® B180, gear, mm

xirodur® B180, gear, mm

  • ​​​​​​Low coefficient of friction
  • Wear-resistant material for continuous operation
  • Vibration-dampening
  • Available in 3 hub designs

Matching gear racks available here

Not found the right geometry? Click here
EUR 6.12/Pc.Cost-effective price break available onlineEUR 3.41/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit-dot
6 ready for shipping in 24 hours

igutek P360 gear racks, mm

New
igutek P360 gear racks, mm
  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads


Calculate the service life now. Click here


Not found the right geometry? Click here

EUR 3.77/Pc.Cost-effective price break available onlineEUR 1.73/Pc. 100 Pc.

9 variant(s), of which:

igus-icon-lieferzeit
7 ready for shipping in 48 hours

iglidur® A500 gear, mm

iglidur® A500 gear, mm
iglidur® A500 | The endurance runner at higher temperatures in the food sector
 
  • Compliant with EU Regulation 10/2011 EC
  • FDA-compliant
  • Temperature-resistant from -100°C to +250°C
  • High chemical resistance
  • Lubrication and maintenance-free
  • Standard range from stock
 

iglidur® F, gear, mm

iglidur® F, gear, mm
  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs
Upon request

9 variant(s), of which:

igus-icon-lieferzeit
9 Delivery time on request

iguform S270 bevel gears - ratio 1:1

iguform S270 bevel gears - ratio 1:1
  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 1.42/Pc.Cost-effective price break available onlineEUR 0.48/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:1

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:1) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here
Not found the right geometry? Click here

EUR 1.55/Pc.Cost-effective price break available onlineEUR 0.54/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

iguform S270 bevel gears - transmission 1:1.5

iguform S270 bevel gears - transmission 1:1.5

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.


The axes of the bevel gears are perpendicular to each other.


The bevel gears listed here (1:1.5) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here
Not found the right geometry? Click here


EUR 4.72/Pc.Cost-effective price break available onlineEUR 2.23/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

igutek P360 bevel gears - transmission 1:1.5

igutek P360 bevel gears - transmission 1:1.5

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.


The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.

Calculate the service life now. Click here
Not found the right geometry? Click here


EUR 5.54/Pc.Cost-effective price break available onlineEUR 2.68/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

iguform S270 bevel gears - transmission 1:2

iguform S270 bevel gears - transmission 1:2

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.


The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:2) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 3.32/Pc.Cost-effective price break available onlineEUR 1.49/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 ready for shipping in 48 hours

igutek P360 bevel gears - transmission 1:2

igutek P360 bevel gears - transmission 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:2) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here
Not found the right geometry? Click here



EUR 3.96/Pc.Cost-effective price break available onlineEUR 1.83/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 ready for shipping in 48 hours

iguform S270 bevel gears - transmission 1:3

iguform S270 bevel gears - transmission 1:3

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.


The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:3) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 2.62/Pc.Cost-effective price break available onlineEUR 1.12/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

igutek P360 bevel gears - transmission 1:3

igutek P360 bevel gears - transmission 1:3

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:3) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 3.07/Pc.Cost-effective price break available onlineEUR 1.35/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

iguform S270 bevel gears - transmission 1:4

iguform S270 bevel gears - transmission 1:4

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:4) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 2.18/Pc.Cost-effective price break available onlineEUR 0.88/Pc. 100 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
6 ready for shipping in 48 hours

igutek P360 bevel gears - transmission 1:4

igutek P360 bevel gears - transmission 1:4

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:4) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 2.62/Pc.Cost-effective price break available onlineEUR 1.12/Pc. 100 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
5 ready for shipping in 48 hours

iguform S270 bevel gears - transmission 1:5

iguform S270 bevel gears - transmission 1:5

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:5) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 2.18/Pc.Cost-effective price break available onlineEUR 0.88/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

igutek P360 bevel gears - transmission 1:5

igutek P360 bevel gears - transmission 1:5

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:5) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

EUR 2.62/Pc.Cost-effective price break available onlineEUR 1.12/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

Consulting

I would be happy to answer your questions personally

Steffen Schack
Steffen Schack

igus-icon-phone+49 2203 9649-9827

Shipping and consultation

In person:
Monday to Friday from 8am - 8pm.

Online:
24h

What can we improve for you? Give us your feedback.

About igus®

Services

Contact

Our payment methods

  • Prepayment
  • Purchase on account
  • Visa
  • Mastercard

Follow us

  • Facebook
  • Instagram
  • LinkedIn
  • YouTube
  • Twitter

Stay up to date and sign up for the igus® newsletter here.

igus-icon-globeLanguage:English|Country:International

The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "igutex", "kineKIT", "manus", "motion plastics", "pikchain", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH