After selection of your ZIP code, we designate the relevant staff to attend to you at once.
Send us your metallic component. We will coat it for you with our iglidur high-performance polymer and send it back to you.
Order the coating powder directly from our online shop and coat your components yourself.
We offer you various iglidur coating materials whose properties make them especially well-suited to particular areas of application. They are used in the following areas, among others:
IC-01: furniture industry, window and door hinges, machine building
IC-02: furniture industry, window and door hinges, machine building
IC-03: automotive technology, machine building, conveyor technology
IC-04: packaging industry, laboratory equipment
IC-05: packaging industry, beverage bottling
IC-06: automotive technology, machine building, conveyor technology
IC-07: laboratory equipment, food technology, medical technology
iglidur polymer coatings are subjected to extensive testing in our test laboratory. Therefore, they fulfil their promise in real life:
►very good mechanical properties ►excellent wear and sliding properties ►accurate in every detail with exact surfaces ►self-lubricating due to incorporated solid lubricants
For this application, springs were coated with an iglidur coating material and used to guide window blinds. The manufacturer was faced with the problem that lubricants did not last over the entire service life of the blinds. So he tested springs with an iglidur IC-02 coating. Although the springs touched the aluminium housing in the test, the coated spring survived the housing. In addition, there was no noise generation by the springs in the test. Thanks to the coating, the use of grease can now be completely eliminated.
Until now, wear pads made of aluminium and a POM material have been used in this application to prevent the wear of two metal components. Now this customer relies on wear pads coated with iglidur IC-02 high-performance polymers. To ensure that the coated plates withstand the extreme environmental conditions, they have been tested in practice with sand, water and high and low temperatures. The result: the ambient conditions are no problem and the metal components do not wear out.
Our customer, a manufacturer of office chairs, used to use components made of a POM material for the armrests. Since the friction of this material was too high, he decided on an alternative from igus: Moulded aluminium linear guides combined with sliding elements made of iglidur J massively reduced the friction. The customer used to coat the aluminium channels with a clear PTFE colour, which was both expensive and required a long handling time. So he tested our IC-02 coating powder, which additionally reduced friction and was also more cost effective. The manufacturing process has thus taken a step forward: the components are now coated directly with IC-02 and no subsequent painting is required. The same contractor coats the inside with IC-02 and then paints the outside for a better look.
The following questions are discussed in the interview:
Do you have questions regarding our iglidur coating powder? Then take a look at our FAQs. There, we answer questions regarding the topic coating with iglidur materials.
Contact us now.Our staff will contact you promptly by e-mail and answer your question.
Our team will get in touch with you by phone. Simply ask for an appointment and our specialists will be happy to advise you in detail.
We will help you plan your project on site. From creation of a design suitable for manufacture to optimum clearance specification and selection of a material.