Our task is to continually develop innovations in the area of e-chains and cables. This enables us to reduce your costs while improving the quality of your machines and systems - in a nutshell, "Tech up, Cost down".
We at igus also take responsibility for contributing to reducing plastic waste and improving recycling: when energy chains reach the end of their service life, we have them processed in the igus recycling programme. You can also learn more about our investment in chemical recycling conducted by Mura Technology Limited.
A 400m² physical-virtual trade show stand that you can visit whenever you like:
The new i.Sense EC.W sensor makes more system availability more cost-effective than ever before. Due to the direct connection of the PLC machine control via potential-free contacts, real-time status monitoring for your energy supply systems is possible from EUR 248.00 (in Germany).
This makes it easier than ever to avoid unplanned downtime and increase plant availability.
With the non-contact system monitoring for gliding e-chain systems® (with & without rollers), igus® has achieved a technological sensation. The new i.Cee wonderbox measures the dynamic parameters of the "passing" chain without contact, similar to a speed trap on the motorway. By comparing with standard values from years of experience in the igus test laboratory, changes in condition can be detected at an early stage and precise service life predictions can be made for each individual chain link.
This case study illustrates how EMO B.V. is able to achieve over 375,000km on its STS cranes with igus chains for cranes®.
In this cleanroom highlight, the smart ultrasonic sensor technology is used to continuously monitor the current sag of the e-skin® flat system. The e-skin® flat with support chain SKF.S is equipped with a defined bend radius and therefore enables unsupported lengths in cleanrooms. As soon as a critical condition of the energy supply system can be detected, predictive maintenance recommendations are issued.
The new theatre e-spool now comes with various smart features: the force of the three springs included is monitored with a load cell sensor. If the force falls below the specified value, the user is prompted to replace the spring. When the specified value is exceeded, there is a blockage that must be removed. A rotation sensor monitoring system can also be installed to count the drum revolutions and determine the position of the chain.
In the new i.Cee:portal, numerous functions and use cases will be made possible in a single central location in the future:
Following the smart plastics complete sets, the i.Sense EC.P systems for push/pull force monitoring and i.Sense EC.B for breakage detection can now also be configured in their entirety including pricing and ordered from the i.Sense online shop.
The individual system configuration for each application can be easily selected based on several selection criteria (chain series, length, control cabinet position, excess cable length). The bill of materials, price and delivery time are then generated. Further information such as EPLAN macros as well as operating and mounting instructions can also be viewed directly in the shop.
To evaluate data from machines and systems, FANUC, the international robot manufacturer, offers its "FIELD system", an open industrial IoT platform. The system uses local network topology to connect production machines from all manufacturers, allowing comprehensive data analysis for the entire process chain.
The infrastructure uses apps from both FANUC and third-party suppliers. The igus "smart plastics – i.Cee" app enables maintenance personnel to monitor the condition of their igus components at all times in the FIELD system and plan maintenance work predictively.
EPLAN Electric P8, one of the main EPLAN GmbH & Co. KG products, is considered one of the industry standards for electrical design. This provides support in plant project planning, from end-to-end planning to manufacturing, commissioning, servicing and maintenance. Various studies were used to determine that the time required for this project planning effort could be reduced by more than 50%.
The new, protocol-independent measuring method determines cable data transmission properties during operation using high-frequency technology. This eliminates the need for additional sacrificial cores. The latest generation can even manage completely contactless cable monitoring.
If the transmission characteristics start to deteriorate, cables can be replaced in good time. Intelligent condition monitoring of the entire moving cable, including the plug-in connector, also prevents system downtimes.
For the latest generation of service robots with cobot function, igus has applied its motion plastics know-how to power electronics and for the first time developed an encoder using conductive plastic tracks. This allows the temperature, number of rotations and cycles to be measured precisely.
Thanks to a connection through the smart plastics systems, a dashboard displays all live data generated – and the customer can choose whether this is done via the cloud or on a local network. The customer receives full transparency about the smart ReBeL® in operation for key indicators such as wear, cycle time and quantities.
The new i.Sense BRG mini-sensor gives you full control. Because with this innovation, you can make (almost) any plastic product from igus "smart"; i.e. as a user, you benefit from real-time condition monitoring including digital evaluation options for the recorded machine data. In combination with the i.Cee module, predictive maintenance recommendations or service life statements are then issued.
Links in e-chains® are made for tough continuous use. Sometimes it still happens differently than you think; especially on long travels. To achieve this, we have now equipped our proven i.Sense EC.B system for intelligent breakage detection with a new rope hoist sensor. This detects a break immediately even with chain lengths over 35m and immediately triggers a message in the event of a fall. This makes it possible to respond directly and avoid expensive consequential damage or complete plant failure.
Robots have long been indispensable in many areas of industrial manufacturing – bb welding, painting, soldering, and palletising: industrial robots are becoming dynamic. A flexible 3D energy chain such as the triflex® R from igus® makes it possible to guide robot cables safely. To detect potential chain breaks due to extreme loads in good time and avoid unplanned machine breakdowns, igus has developed i.Sense TR.B, the world's first breakage monitoring system for 3D energy chains.
Free 3D data, operating instructions, and much more in our smart plastics service area