Series Z06

Here you can configure your e-chain system® individually. All entries and changes are taking over to the part list which is situated at the end of the page.

Series Z 06 - chain, can be filled along the inner radius

1. Very easy to fill - ideal for applications with pre-fitted plugs
2. Small pitch for quiet, smooth running
3. Limited torsional movement possible
4. Very low weight
5. "Pushbutton principle" holds links together
6. Cable-friendly interior separation
7. Version E, filled along outer radius
8. Version Z, filled along inner radius
9. Mounting bracket with integrated strain relief option

Available inner widths Bi: 10 to 20 mm
Available bend radii R: 18, 28, 38 mm
Pitch: 20 mm/link = 50 links / m

Series Z06 is suitable for the following types of applications:

Vertical:hanging applications, standing applications
Horizontal: unsupported applications ≤ 0,55 m
rotary: rotating applications may be possible, please contact us

When to use Series Z06

When a small e-chain® with 10,7 mm inner height and small bend radii is required
For inner widths up to 20 mm
For unsupported lengths up to 0,55 m and fill weights up to 0,45 kg/m
When easy filling without opening and closing of lids is required
If quiet running is required.
If a light and cost-efficient e-chain® is required

When not to use Series Z06

For applications with particularly high loads and long unsupported lengths
Series 06 E2 micro
Version Z is not suitable for gliding applications
Series 07 Zipper

Installation dimensions


Part No. :
Inner width Bi [mm]:
Bending radius R [mm]:
Travel distance S [mm]:
Fixed end dM [mm]:
Chain length^** [mm]:
Number of chain links :
External width Ba [mm]:
H^* [mm]:
D [mm]:
K [mm]:
Hi [mm]:
Ha [mm]:
Weight per link [g]:
Weight [kg/m]:
* The required clearance height is HF = H + 10 mm (with 0,2 kg/m fill weight), this should be taken into account for all application types. Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.

Overlapping on the opening mechanism, except for width 10 and 16, gap dimension 5,5 mm
A=Moving end, B=Fixed end
Pitch: 20 mm
Links per m: 50
Travel: S
Chain length = S/2 + K

Unsupported length

Unsupported length versus fill weight
X axis: Unsupported length in m FLB/FLG
Y axis: Fill weight in kg/m
Lower scale: Travel S in m
FLB = Unsupported with permissible sag
FLG = Unsupported with straight upper run

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-Chain® Expert call Service life calculation PDF file Ask the product expert

Designing with igus®

Mounting bracket with and without strain relief tiewrap plates

Quickfix

Assembly instructions

Technical specifications

Strain reliefs

Mounting brackets

Polymer - one-sided

unassembled	assembled

One-piece mounting bracket - secure fit

Corrosion-resistant

Can be fabricated

Mounting surfaces, fits inside/outside

Available with tie wrap plate


:
Part No. :
A [mm]:
B [mm]:
Number of teeth :
No. of teeth [mm]:

Part List

Personal contact

GToB Imprint General notes Data protection declaration

Material of chain links	igumid NB
Min. permissible temperature [°C]	-40
Max. permissible temperature [°C]	80
Gliding speed (max.) [m/s]	3
Max. gliding speed [m/s²]	10
Speed FLG max. [m/s]	20
Speed FLG max. [m/s²]	200
Speed FLB max. [m/s]	3
Speed FLB max. [m/s²]	6
Flammability class of chain link	VDE 0304 IIC UL94 V2