E2 micro ESD e-chains® are very small, one-piece and two-piece e-chains® with a low weight and are therefore ideal for highly dynamic applications. E2 ESD micro e-chains® are strong and in many version available. igus® also offers a host of accessories and fixation options. Available inner widths Bi: 16 to 30 mm Available bend radii R: 18 to 38 mm Pitch: 20 mm/link = 50 links/m
* The required clearance height is HF = H + 10mm (at 0,2kg/m fill weight) Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 20mmChain links per m: 50Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run Reference example A: fill weight = 0.5 [kg/m] unsupported length FLB = 0.55 m travel = 1.1 m The diagrams for unsupported lengths apply to standard e-chains® made of igumid GLW material. The values can also be used for assessing e-chain® applications in ESD special material. If the respective maximum unsupported length exceeds 80%, the suitability of the e-chain® should be verified by a practical test.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Other installation types
Option 1: Separators
Option 1 - separators Separators can be placed anywhere in the chain's cross-section as interior separation for the e-chain® - as standard, separators should be fitted every 2nd chain link! Note: For the E2C.10, install the interior separation before assembling the e-chain®! Standard separator - E2.10.2.ESD For easy vertical separation in energy chains. Separator can be positioned at any position in the cross-section. No snap-in option, moves freely.
Plastic - Pivoting on both sides
Data protection declaration