Accessories for energy chains
Strain relief elements
Strain relief clamps, tiewrap plates and modular plug-in strain relief elements.
Upon request
To the product page
Guide troughs for long travels
From the lightweight and universally deployable "Super Alu" guide trough through to the simple and cost-effective snap-in trough.
Upon request
To the product page
smart plastics - intelligent sensor technology for predictive maintenance of energy chains
Eliminate unplanned downtime and reduce maintenance costs with smart plastics:
- i.Sense - Condition monitoring
- i.Cee - Predictive maintenance
Upon request
To the product page
Assembly tools for energy chains
Simple opening and closing of chain links and big time savings in assembly.
e-rib: corrugated tube reinforcement
The reinforcement for existing corrugated tube systems. Easily retrofittable, little installation space required and stability against unwanted sideways movement.
Chain opener for the E2/000
- Reduce the assembly time to open the chain from 33 sec. to 2 sec. (Tested series 2700.07)
- For E2/000 product range (2400/2500, 2600/2700, 3400/3500)
- Open and close a long piece of e-chain® in one go
Office e-chain OCR | Mounting brackets
- Simply attach with block magnets
- Diameter ø 35mm
- Complete set includes:
- Moving end OCR.500.1
- Fixed end OCR.500.2
Chain opener for the E2.1 system
- Opening of long e-chain sections in one go
- Opening time reduced by a factor of 16 (from 33 to 2 seconds for a 1 m piece)
- Versatile assembly tools for the E2.1 series
- Less force is needed if these tools are used
- Fast Return on Investment
chainfix clamps for pneumatic hoses CFX12.X.P | With pneumatic double troughs | Cable diameter 04mm/08mm
- For hose diameters 4 and 8mm
- High holding force due to "all-round" grip
- The cross section of pneumatic hoses is fully retained
- No crushing of the hoses, and therefore no loss of hose length
- Good price-performance ratio
chainfix clamps for pneumatic hoses CFX16.X.P | With pneumatic double troughs | Cable diameter 06mm / 10mm / 12mm
- For hose diameters 4 and 8mm
- High holding force due to "all-round" grip
- The cross section of pneumatic hoses is fully retained
- No crushing of the hoses, and therefore no loss of hose length
- Good price-performance ratio
Steel support tray for energy chains
Simple one-piece steel support trays for the energy chain's lower run according to your requirements and specifications.
- Noise reducing and low abrasion, safe guidance
- Simple design: easy mounting to all types of profiles and wall brackets
- Lightweight material: available in the colour of your choice
- Available in two types and four versions as a modular system
Super aluminium support tray for energy chains
The aluminium support tray serves to support the energy chain's lower run.
- Noise-reducing: rubber silencer profile optional
- Simple connection: optimised plastic fixed end module
- Wear-reducing: glide strips protect from wear on the sides
- Easy installation: with standard bottom clamps, basic version
- Corrosion-resistant: seawater-resistant aluminium profile
Honeycomb strain relief CFU.V
The CFU.V honeycomb strain relief offers a tribologically optimised clamping effect, which ensures cable-friendly strain relief. In addition, cables can be replaced flexibly and quickly thanks to the simple handling of the CFU.V. Further advantages that CFU.V honeycomb strain relief offers:
- 80% faster filling compared to igus® CFX clamps
- Universal installation
- Flexible layout
- Openable on both sides
- Strain relief for different cables in one chamber