igusigus-icon-cart(0)

Spherical bearings

Say goodbye to expensive, heavy and high-maintenance spherical bearings made of metal. Instead, count on the more economical alternative: igubal® spherical bearings made of a plastic which igus® engineers have turned into an all-round talent in decades of research work: the polymer bearings are up to 40% more cost-effective and up to 80% lighter than metal bearings. They are easy to mount and more economic in operation. Why? Because they are maintenance-free and have a long service life. The polymer bearings permit low-friction dry operation without lubricant, they are resistant to dust and coarse dirt, corrosion-free in wet and damp environments and can be deployed in a wide range of media. They remain reliable in operation, even when they have been exposed to UV radiation from the sun or nuclear radiation for many years. Suitable for temperatures ranging from -30 to +80°C, and even up to +200°C in the HT version.
Show Inch Products
Number of products 165

Variable coupling joint, WDGM-FX, with ball studs, igubal®

Variable coupling joint, WDGM-FX, with ball studs, igubal®
  • Socket cup M5, M6, M8 and M10
  • Individual centre dimensions and lengths
  • Individual alignment of the bearing position
  • Ends sealed against dirt
  • Tube material: stainless steel
  • Ball stud material: galvanised steel. Stainless steel, igumid® G
EUR 8.89/Pc.Cost-effective price break available onlineEUR 5.07 at 100 mm 500 Pc.

24 variant(s), of which:

igus-icon-lieferzeit
24 ready for shipping in 2 weeks

Variable coupling joint, WDGM-FX, for ball studs, igubal®

Variable coupling joint, WDGM-FX, for ball studs, igubal®
  • Socket cup M5, M6, M8 and M10
  • Individual centre dimensions and lengths
  • Individual alignment of the bearing position
  • Ends sealed against dirt
  • Tube material: stainless steel
EUR 7.87/Pc.Cost-effective price break available onlineEUR 4.69 at 100 mm 500 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 2 weeks

Crimpable thread inserts for adjustable coupling rods, igubal® TDGM

Crimpable thread inserts for adjustable coupling rods, igubal® TDGM
  • Individual stitch size
  • Precisely adjustable due to left/right-hand thread
  • Wide range of combination possibilities, e.g. with clevis and rod ends, as well as angle/axial joints
  • Various thread sizes and diameters possible
  • Weight savings compared to solutions with threaded rods
EUR 5.58/Pc.Cost-effective price break available onlineEUR 2.42 at 100 mm 500 Pc.

5 variant(s), of which:

igus-icon-lieferzeit
5 Delivery time on request

Variable coupling joint, WDGM, with ball studs, igubal®

Variable coupling joint, WDGM, with ball studs, igubal®
  • Socket cup M5, M6, M8 and M10
  • Individual centre dimensions and lengths
  • Individual alignment of the bearing position
  • Tube material: galvanised steel, stainless steel
  • Ball stud material: galvanised steel. Stainless steel, igumid® G
EUR 6.60/Pc.Cost-effective price break available onlineEUR 2.78 at 100 mm 500 Pc.

69 variant(s), of which:

igus-icon-lieferzeit
69 ready for shipping in 72 hours

Variable coupling joint, WDGM, for ball studs, igubal®

Variable coupling joint, WDGM, for ball studs, igubal®
  • Socket cup M5, M6, M8 and M10
  • Individual centre dimensions and lengths
  • Individual alignment of the bearing position
  • Tube material: galvanised steel, stainless steel
EUR 5.58/Pc.Cost-effective price break available onlineEUR 2.40 at 100 mm 500 Pc.

24 variant(s), of which:

igus-icon-lieferzeit
24 Delivery time on request

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®
  • Socket cup M6
  • Individual centre dimensions and lengths
  • Individual alignment of the bearing position
  • Easy assembly and disassembly
  • High holding forces when assembled
EUR 10.37/Pc.Cost-effective price break available onlineEUR 5.77 at 100 mm 500 Pc.

13 variant(s), of which:

igus-icon-lieferzeit
13 ready for shipping in 72 hours

Crimped coupling joints GDGM-05-V with rotatable clevis joints

Crimped coupling joints GDGM-05-V with rotatable clevis joints
EUR 10.93/Pc.Cost-effective price break available onlineEUR 5.57 at 100 mm 500 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 72 hours

Crimped coupling joints GDGM-05-V with rotatable clevis joints with bolts and locking clip

Crimped coupling joints GDGM-05-V with rotatable clevis joints with bolts and locking clip
EUR 11.49/Pc.Cost-effective price break available onlineEUR 5.91 at 100 mm 500 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 72 hours

Crimped coupling joints GDGM-05-V with rotatable clevis joints with spring-loaded fixing clips

Crimped coupling joints GDGM-05-V with rotatable clevis joints with spring-loaded fixing clips
EUR 11.59/Pc.Cost-effective price break available onlineEUR 5.93 at 100 mm 500 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 72 hours

igubal® rod end bearing with internal thread

igubal® rod end bearing with internal thread
EUR 4.37/Pc.Cost-effective price break available onlineEUR 1.95/Pc. 2500 Pc.

87 variant(s), of which:

igus-icon-lieferzeit-dot
10 ready for shipping in 24 hours

Rod End With Female Thread, For Food Industry

Rod End With Female Thread, For Food Industry
  • Housing optically and magnetically detectable
  • FDA- and EU10/2011-compliant
  • Right- and left-handed thread
  • Dimensional series K following DIN ISO 12240
  • In industry-standard blue
EUR 6.41/Pc.Cost-effective price break available onlineEUR 2.98/Pc. 2500 Pc.

5 variant(s), of which:

igus-icon-lieferzeit
5 ready for shipping in 72 hours

igubal® rod end bearing with female thread with hexagonal housing

igubal® rod end bearing with female thread with hexagonal housing
  • Simplified assembly due to hexagonal housing; direct locking due to moulded nut
  • Thread direction: right / left
  • Housing material: igumid® G
  • Dimensional series K according to DIN ISO 12240
EUR 4.36/Pc.Cost-effective price break available onlineEUR 2.00/Pc. 2500 Pc.

30 variant(s), of which:

igus-icon-lieferzeit
30 ready for shipping in 72 hours

igubal® Rod end with male thread

igubal® Rod end with male thread
  • Thread direction: right/left
  • Housing material: igumid® G
  • Dimensional series K following DIN ISO 12240
EUR 3.95/Pc.Cost-effective price break available onlineEUR 1.49/Pc. 2500 Pc.

34 variant(s), of which:

igus-icon-lieferzeit-dot
8 ready for shipping in 24 hours

igubal® metal rod end bearing with internal thread, iglidur® J bearing ring

igubal® metal rod end bearing with internal thread, iglidur® J bearing ring
  • With stainless steel spherical cap for high lateral loads
  • Maintenance-free inner ring made of iglidur® J
  • Housing made of stainless steel or zinc die casting
  • Dimensional series K based on DIN ISO 12240
EUR 5.43/Pc.Cost-effective price break available onlineEUR 4.30/Pc. 2500 Pc.

23 variant(s), of which:

igus-icon-lieferzeit-dot
1 ready for shipping in 24 hours

Rod end made of stainless steel with female thread, iglidur® A181 bearing ring

Rod end made of stainless steel with female thread, iglidur® A181 bearing ring
  • Metallic rod end with female thread with stainless steel spherical ball for high transverse loads
  • Maintenance-free inner ring made of iglidur® A181 for food applications
  • Right-hand/left-hand thread
  • Stainless steel housing
  • Dimensional series K following DIN ISO 12240
EUR 8.15/Pc.Cost-effective price break available onlineEUR 6.45/Pc. 2500 Pc.

7 variant(s), of which:

igus-icon-lieferzeit
5 ready for shipping in 72 hours

EUR 4.53/Pc.Cost-effective price break available onlineEUR 3.62/Pc. 2500 Pc.

21 variant(s), of which:

igus-icon-lieferzeit-dot
2 ready for shipping in 24 hours

Rod end made of stainless steel with male thread, right-hand/left-hand, KARM/KALM, iglidur® A181 bearing ring, mm

Rod end made of stainless steel with male thread, right-hand/left-hand, KARM/KALM, iglidur® A181 bearing ring, mm
  • Metallic rod end with male thread with stainless steel spherical ball for high transverse loads
  • Maintenance-free inner ring made of iglidur® A181 for food applications
  • Right-hand thread
  • Stainless steel housing
  • Dimensional series K following DIN ISO 12240
EUR 6.79/Pc.Cost-effective price break available onlineEUR 5.43/Pc. 2500 Pc.

7 variant(s), of which:

igus-icon-lieferzeit
6 ready for shipping in 72 hours

igubal® metal rod end bearing with metal pin, female thread

igubal® metal rod end bearing with metal pin, female thread
  • Stainless steel or zinc die-cast housing
  • Stainless steel or zinc-plated steel trunnions
  • For particularly high loads
EUR 5.58/Pc.Cost-effective price break available onlineEUR 4.62/Pc. 2500 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 2 weeks

EUR 4.62/Pc.Cost-effective price break available onlineEUR 3.85/Pc. 2500 Pc.

igubal® rod end bearing with female thread

igubal® rod end bearing with female thread
  • Simplified assembly due to hexagonal housing; direct locking due to moulded nut
  • Thread direction: right / left
  • Housing material: igumid® G
  • Dimensional series K according to DIN ISO 12240
EUR 2.81/Pc.Cost-effective price break available onlineEUR 0.80/Pc. 2500 Pc.

72 variant(s), of which:

igus-icon-lieferzeit-dot
4 ready for shipping in 24 hours

Consulting

I would be happy to answer your questions personally

Thomas Preißner
Thomas Preißner

igus-icon-phone+49 2203 9649 115

Shipping and consultation

In person:
Monday to Friday from 8am - 8pm.

Online:
24h

What can we improve for you? Give us your feedback.

About igus®

Services

Contact

Our payment methods

  • Prepayment
  • Purchase on account
  • Visa
  • Mastercard

Follow us

  • Facebook
  • Instagram
  • LinkedIn
  • YouTube
  • Twitter

Stay up to date and sign up for the igus® newsletter here.

igus-icon-globeLanguage:English|Country:International

The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "igutex", "kineKIT", "manus", "motion plastics", "pikchain", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH