Cleanroom-compatible energy supply for high-speed SCARA applications

Clean SCARA Cable Solution in ESD (study)

Based on the experience gained from the SCARA Cable Solution developed in 2020, a certified cleanroom variant is now also available - the Clean SCARA Cable Solution. The optimised swivel-mounted connections enable use up to ISO Class 2 (IPA certified). In combination with the e-skin® design SKS20, which has been tried and tested in the highest cleanroom class, highly dynamic applications can also be realised. The proven zipper opening principle of the SKS20 enables quick and easy cable filling. The new Clean SCARA Cable Solution is available in all existing connections of the Standard SCARA Cable Solution.

Reasons for using the Clean SCARA Cable Solution

Tech up

Cleanroom-compatible system, easy to retrofit
Safe guidance of cable and hose in the cleanroom

Cost down

Easy filling of the e-skin® SKS20 thanks to the proven zipper opening principle
High running performance
All components are individually replaceable
Reduction of downtimes

Proof

IPA certificate ISO class 2
More than 2,000,000 test cycles realised in the igus® test laboratory

Sustainability

Individual cables can be swapped
Extremely high downtime ensures less waste

Presentation of the Clean SCARA Cable Solution

Thanks to the excellent specifications of the e-skin in the cleanroom, the Clean SCARA Cable Solution directly fulfils the cleanroom ISO Class 2 classification. This opens up new possibilities in the field of SCARA robotics for using one of these robots in the cleanroom.
The rotating bearing function of the standard SCARA Cable Solution has been adopted and adapted to the e-skin energy supply. This means that the two SCARA Cable Solutions cannot be combined with each other.

The cleanest solution for operating a SCARA robot in the cleanroom!

Components of the Clean SCARA Cable Solution

Clean Scara Cable Solution end pieces and hose

The SCARA cable solution also consists of three elements matching or adapted to the SCARA robot in question.

1. Pivot bearing moving end: TR.CSCS.20.01.20.94.01.1

2. Pivot bearing moving end 45° angled: TR.CSCS.20.01.20.94.02.1

3. Pivot bearing fixed end: TR.CSCS.20.02.40.01.1

4. Cleanroom energy chain e-skin® soft: SKS20.033.02.1

Buy pivot bearing moving endBuy pivot bearing moving end 45° angledBuy pivot bearing fixed endBuy cleanroom energy chain

Part codes Clean SCARA Cable Solution

Moving end (1)

Part number ball screw Clean SCARA Cable Solution

Fixed end (2)

Centre piece (3)

Clean SCARA Cable Solution in ESD Material (study)

The ESD SCARA cable solution suitable for cleanrooms is intended to close the gap between the IPA-certified Clean SCARA Cable Solution (CSCS) and the Standard SCARA Cable Solution (SCS) certified by the ESD Academy. The product was specially developed for use in highly dynamic cleanroom environments and offers all the advantages of the already realised CSCS. By adapting the base material, connections in iglidur i8 ESD and the specially developed material texture of e-skin ESD, this energy supply can also be used in ESD areas.

Request Clean SCARA Cable Solution in ESD