Change Language :

drylin® T-automatic - clearance adjustment

drylin® T clearance adjustment

With drylin® T-Automatic, the bearing clearance is adjusted automatically. Adjustment during operation can be carried out automatically in steps of 0.1 mm. The carriage must be unloaded for this.

drylin® T clearance adjustment 01
drylin® T clearance adjustment 02

This is how it's done:

drylin® T clearance adjustment 03

On delivery, 3 red keys are already screwed into the openings provided. These are required to mount the trolley on the rail. If these keys have been removed, they must be reinserted into the openings provided up to the stop-dog and locked by turning them 90° to the right. The pretension of the glide strip is cancelled.

drylin® T clearance adjustment 04

If the trolley is on the rail, release the keys by turning them 90° to the left and remove them. The clearance is set automatically.

drylin® T clearance adjustment 05

Test the clearance of the carriage by moving it slightly back and forth. Fine adjustment can be made during this process.

drylin® T clearance adjustment 06

The guide carriage can be removed at any time. To do this, the keys must be reinserted into the openings provided (see step 1).

Consulting

I look forward to answering your questions

Michael Hornung
Michael Hornung+49 2203 9649 0Write e-mail

Shipping and consultation

In person

Monday to Friday: 8 am – 8 pm
Saturday: 8 am – 12 pm


Chat-Service
Monday to Friday: 8 am – 5 pm

WhatsApp-Service
Monday to Friday: 8 am – 5 pm