My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

E4/00 - The E4.1 predecessor for quiet operation and easy assembly

E4/00 (pronounced: E4 hundred), the most multifunctional of the E4 chains, is a safe choice in most applications (Note: For travels > 200 m and for "laterally unsupported installation," please choose E4/4). By the "inner link - outer link" principle, the installation and dismantling are simple. Design features like the "brakes" in the chain stop dog clearly reduce the operation noise level. The E4/00 system is available from stock worldwide and is customized and supplied for your application in 24-72 hours.

Rugged, low noise, modular - E4/00 sets standards

 

Opening of the e-chain®: Push down the groove of the cross bar with a screw driver. Loosen by prizing (against the clamp)

 

Lid/Bottom dismantling of E-Tube: Press vertically on the groove of the lid/bottom with a screwdriver and prize it up

 
e-chain® selection aids

You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.

Installation instructions

Joining, separating and opening of the e-chain® and e-tubes.

Application examples

Applications in various industrial sectors and in the igus® test laboratory.

With crossbars every link, snap-open along both sides - For specially demanding applications
e-chain® with crossbars at every link  
Series 220

Inner height hi: 28 mm
Inner widths Bi: 40 - 300 mm
bending radii R: 55 - 250 mm
Pitch: 46 mm

e-chain® with crossbars at every link  
Series 280

Inner height hi: 32 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 63 - 300 mm
Pitch: 56 mm

e-chain® with crossbars at every link  
Series 380

Inner height hi: 42 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 75 - 350 mm
Pitch: 67 mm

e-chain® with crossbars at every link  
Series 400

Inner height hi: 56 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 135 - 500 mm
Pitch: 91 mm

e-chain® with crossbars at every link  
Series 600

Inner height hi: 108 mm
Inner widths Bi: 200 - 600 mm
bending radii R: 200 - 1000 mm
Pitch: 143 mm

e-chain® with crossbars at every link  
Series 640

Inner height hi: 112 mm
Inner widths Bi: 87 - 562 mm
bending radii R: 200 - 1000 mm
Pitch: 143 mm

With crossbars at every other link, snap-open along both sides - For almost all applications
e-chain® with crossbars at every other link  
Series 290

Inner height hi: 32 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 63 - 300 mm
Pitch: 56 mm

e-chain® with crossbars at every other link  
Series 390

Inner height hi: 42 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 75 - 350 mm
Pitch: 67 mm

e-chain® with crossbars at every other link  
Series 410

Inner height hi: 56 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 135 - 500 mm
Pitch: 91 mm

e-chain® with crossbars at every other link  
Series 601

Inner height hi: 108 mm
Inner widths Bi: 200 - 600 mm
bending radii R: 200 - 1000 mm
Pitch: 143 mm

e-tube, snap-open along both sides - completely closed, chip protection
R760 series  
Series R760

Inner height hi: 28 mm
Inner widths Bi: 50 - 300 mm
bending radii R: 63 - 250 mm
Pitch: 46 mm

R770 series  
Series R770

Inner height hi: 32 mm
Inner widths Bi: 50 - 300 mm
bending radii R: 125 - 300 mm
Pitch: 56 mm

R780 series  
Series R780

Inner height hi: 42 mm
Inner widths Bi: 50 - 300 mm
bending radii R: 125 - 350 mm
Pitch: 67 mm

R880 series  
Series R880

Inner height hi: 56 mm
Inner widths Bi: 75 - 462 mm
bending radii R: 150 - 500 mm
Pitch: 91 mm

R608 series  
Series R608

Inner height hi: 108 mm
Inner widths Bi: 200 - 500 mm
bending radii R: 250 - 1000 mm
Pitch: 143 mm

Assembly tool for E4-series

For the practical opening and closing of the E4 series. Big savings in assembly time

Assembly tool for E4-series    

E4/00-e-chain® with 4-piece structure

The low-noise E4 chain

Further noise reduction with sound dampers (E4/101 series)

Wide application range

Numerous interior separation options

Large accessory kits

Widths up to 2000 mm through extension links

Snap-open along both sides

Max. travel distance: Over 200 m

Typical industrial sectors and applications

Robotics and handling systems

Materials-Handling Technology

Refrigeration engineering

Construction machinery

Machine tools

Wood working

Any type of machines

Semiconductor

Clean room applications cold storage houses

Welding machines

Maritime applications

General mechanical engineering etc.

E4  

IPA certification: cleanroom ISO class 3 (DIN 14644-1)
tested at v= 1m/s for series 280.10.100.0
 
ESD classification: electrically conductive ESD versions upon request