Change Language :
New accessories for the interior separation of the E4Q
Expanding the E4Q modular kit
With increased holding force - locking separator 82.8 for the E4Q.82
locking separator for higher holding/opening forces in high humidity
humidity and/or large hydraulic hoses. Soon
also available for the E4Q.58.
Tech up
- More interior separation options for more flexibility
Cost down
- Guide hydraulic hoses safely
Proof
- Well-known and proven from the E4.1 modular system
Sustainability
- Leave your energy chain or drag chain on the
End of the life cycle at igus® chainge® Recycling
programme. No matter from which manufacturer:
igus.eu/chainge
Product range:
| Part No. Locking separator, unassembled | Part No. Locking separator, assembled |
|---|---|
| 82.8 | 82.8.1 |
Simply run parallel to the chain - TUB lugs for the E4Q.44/ E4Q.58 and new SHM.60 hose holder
Run additional corrugated tubes, cables or hoses parallel to the existing e-chain® Easy retrofitting by fitting PMACLIP system holders. Sizes from 17-48 mm. In addition, a new hose holder to guide large hoses with 60 mm.
Tech up
- For laterally guided cables and hoses
Cost down
- Quick replacement
Proof
- TUB-programme for systems E4.1 and E4.1L in
numerous applications successfully in use
Sustainability
- Leave your energy chain or drag chain on the
End of the life cycle at igus® chainge® Recycling
programme. No matter from which manufacturer: igus.eu/chainge
Product range:
* View from the fixed end
| Part No. TUB outer link on the right* | Part No. Outer link left* | Part No. Outer link at both ends* | PMACLIP nominal width ø [mm] | Hose holder SHM.60 nominal width ø [mm] |
|---|---|---|---|---|
| E4Q.44.XXXTUBR.RRR.0 | E4Q.44.XXXTUBR.RRR.0 | E4Q.44.XXXTUBR.RRR.0 | 07, 10, 12, 17, 23 | 60 |
| E4Q.58.XXXTUBR.RRR.0 | E4Q.58.XXXTUBR.RRR.0 | E4Q.58.XXXTUBR.RRR.0 | 17, 23, 29, 36, 48 | 60 |
| Part No. PMACLIP | NW [mm] | A [mm] | B [mm] | C [mm] | H [mm] | E [mm] | M [mm] |
|---|---|---|---|---|---|---|---|
| I-BFH-17-0 | 17 | 30.0 | 20 | 34 | 20 | 68 | M6 |
| I-BFH-23-0 | 23 | 38.5 | 20 | 42 | 24 | 85 | M6 |
| I-BFH-29-0 | 29 | 45.5 | 20 | 48 | 27 | 99 | M6 |
| I-BFH-36-0 | 36 | 55.5 | 20 | 56 | 31 | 119 | M6 |
| I-BFH-48-0 | 48 | 67.5 | 20 | 68 | 37 | 143 | M6 |
| Part No. Hose clamp | NW [mm] | A [mm] | B [mm] | C [mm] |
|---|---|---|---|---|
| SHM.60 | 60 | 60 | 30 | 25.9 |
Precise positioning - notch separator 64Q.5 for the E4Q.64 series
The well-known notch separator from other e-chain® series is now also available for the E4Q.64. The notch separator can be positioned precisely. Ideal for 90° rotated applications. Integrated notching ensures that the interior separation is held firmly in place.
Tech up
- Integrated grid ensures that the interior separation is held firmly in place
Cost down
- More interior separation options for more flexibility
Proof
- Known from other modular systems
Sustainability
- Leave your energy chain or drag chain on the
End of the life cycle at igus® chainge® Recycling
programme. No matter from which manufacturer: igus.eu/chainge
Product range:
| Part No. notch separators | Part No. Separators, asymmetrical | Part No. lean separator | Part No. Shelves |
|---|---|---|---|
| 64Q.5 | 64Q.9 | 64Q.12 | 3200.X |
Letting cables live longer - Universal-interior separation system E4Q.64
Extend the service life of cables even further with horizontal and vertical internal separations. The easy-to-install
components are now also available for the E4Q.64 series.
Tech up
- For safety and ease of assembly
Cost down
- Simple filling for the E4Q.64 series, saves considerable assembly time
Proof
- Rounded, cable-friendly elements and individually adaptable interior separation increase the service life of the cables
Sustainability
- Leave your energy chain or drag chain on the
at the end of their life cycle in the igus® Chainge® recycling programme. No matter from which manufacturer: igus.eu/chainge
Product range:
| Part No. for series | Asymmetrical separators | Universal middle plates | Universal side plates | Universal separators | Snap-in shelves (X = mm) |
|---|---|---|---|---|---|
| E4Q.64 / H4Q.64 | 64Q.9 | 64Q.21 | 64Q.22 | 64Q.23 | S428.XXX |
Clips and fixed - strain relief system C825.075.ZS and C1132.080.ZS
The strain relief for clipping in - now also for the
crossbar of the E4Q series.
Tech up
- Flexible strain relief for many cables on the crossbar
Cost down
- Quick and efficient strain relief with tiewrap plate and cable tiewrap
Proof
- Well-known and proven from many other igus® series
Sustainability
- Leave your energy chain or drag chain on the
at the end of their life cycle in the igus® Chainge® recycling programme. No matter from which manufacturer: igus.eu/chainge
Product range:
| Part No. locking | A [mm] | B [mm] | Number of teeth [n] | Part No. for e-chain® series |
|---|---|---|---|---|
| C825.075.ZS4 | 70 | 65 | 11 | E4Q.34, H4Q.34, E4Q.44, H4Q.44 |
| C1132.080.ZS | 80 | 73 | 13 | E4Q.58, H4Q.58, E4Q.58L, H4Q.58L, E4Q.64L, H4Q.64L, E4Q.82, H4Q.82 |
E4Q energy chains
E4Q series energy chains have been developed to offer the best possible solution for unsupported and long travels. Based on the robust and proven E4.1 energy chain standard, the new range brings a long service life and a high degree of modularity.
You might also be interested in
Consulting
I look forward to answering your questions
Dieter Reitz+49 2203 9649 7070Write e-mail
Shipping and consultation
In person
Monday to Friday: 8 am – 8 pm
Saturday: 8 am – 12 pm
Chat-Service
Monday to Friday: 8 am – 4 pm
WhatsApp-Service
Monday to Friday: 8 am – 4 pm