Change Language :

drylin® SHT – design and calculation

VERTICAL

drylin®®-spindle linear units have been developed for positioning adjustments of all kinds. The linear adjustment is realised via trapezoidal threads of different sizes or via high helix lead screws, which can be driven either manually or by motor. The maximum travelling speed is up to 1 m/min, depending on the thread and load.
The suitability of the spindle linear units for your application can be checked using the graph below.

The following trapezoidal thread sizes are installed in the spindle linear tables of the SHTseries:

  • TR 10x2: SHT-12, SHTC-12, SHTP-12, SLW-1040
  • TR 14x4: SLW-1660
  • TR 18x4: SHT-20, SHTC-20, SLW-2080
  • TR 24x5: SHT-30, SHTC-30
  • TR 26x5: SHTC-40
  • TR 30x6: SHTC-50

max. Feed speed [m/min.]

Chart with several declining curves for drylin SHT: travel on X up to 3,000 and Y up to 1.8.

X = Centric load in vertical installation position [N]
Y = feed rate [m/min.]

max. Spindle speed [rpm]

Characteristic chart for drylin slides with several colored curves across the stroke.

X = Centric load in vertical installation position [N]
Y = spindle speed [Upm]

max. Drive torque [Nm]

Chart with lines for different drylin SHT sizes shows rising values on the X-axis.

X = Centric load in vertical installation position [N]
Y = required Max. Drive motor. [Nm]

Consulting

I look forward to answering your questions

Michael Hornung
Michael Hornung+49 2203 9649 0Write e-mail

Shipping and consultation

In person

Monday to Friday: 8 am – 8 pm
Saturday: 8 am – 12 pm


Chat-Service
Monday to Friday: 8 am – 4 pm

WhatsApp-Service
Monday to Friday: 8 am – 4 pm