e-skin® flat with support chain SKF.S

The e-skin® flat with support chain SKF.S is an addition to the e-skin flat. The support chain is easy to add to and thus enables unsupported travels. The support chain can be combined with the SKF12C and SKF15C.

Part No.	Outer width Ba	Outer height Ha	Bend radius R
SKF.S.08	8mm	8mm	40 / 70 / 100mm
SKF.S.10	10mm	10mm	125mm

To the e-skin flat configurator

[NEW] SKF.S.10.100.01.0 e-skin flat with support chain

e-skin flat Stützkette R 55 with a flat, curved guide for cables and lines.

More stability, easier to assemble

A radius of 100mm has been added to the new two-part e-skin flat with support chain range. Both two-part e-skin flat with support chain designs of the e-skin flat system (radius 100mm) use clevis pins to meet increasing application conditions and simpler installation. They are also easier to extend and shorten. The e-skin flat with support chain is guided in the e-skin flat POD SKF12C and can be integrated into the existing structure of the mounting brackets, where they provide greater stability.

Part No.	Inner height [mm]	Outer height [mm]	Bend radius [mm]	Pitch [mm]	Spacer mounting bracket
SKF.S.10.100.01.0	10	10	100	30	SKFC.SP20

SKF.S.10.055.01.0 e-skin® flat with support chain

e-skin flat support chain R 55 for protected cable guidance.

More stability, easier to assemble

The new support chain with a radius of 55mm has been added to the radius portfolio. As it uses bolts, it can meet increasingly challenging application conditions and is easier to assemble. The e-skin® flat with support chain is also simpler to extend and shorten. The support chain is guided in the e-skin flat POD SKF12C and can be integrated into the existing structure of the mounting brackets.

Part No.	Inner height [mm]	Outer height [mm]	Bend radius [mm]	Pitch [mm]	Spacer mounting bracket
SKF.S.10.055.01.0	10	10	55	30	SKFC.SP20

SKF.S.10.125.01.0 e-skin® flat with support chain

Drawing of the SKF.S cable carrier with dimensions A, B and 10.

The support chain enables longer travel distances of up to 5 metres with the cleanroom-optimised e-skin flat system. The new larger support chain is guided in the e-skin flat POD SKF15C and can be integrated into the existing mounting bracket structure.

Part No.	Inner height [mm]	Outer height [mm]	Bend radius [mm]	Pitch [mm]	Spacer mounting bracket
SKF.S.10.125.01.0	10	10	125	30	SKFC.SP20

Tech up

Suitable for cleanrooms according to IPA cleanroom Class 1, also for the three-layered e-skin flat
Available in two versions: closed and openable with a special closure system
Can be combined with SKF12C and SKF15
Stackable, width-variable mounting brackets
Modular and compact design
Defined bend radius for applications with e-skin flat
Profile for cleanroom applications with compact installation spaces
e-skin flat with support chain with enclosed e-chain
to prevent abrasion

Cost down

Monitoring of the sag via ultrasonic measurement with replacement recommendation - optional with the i.Cee EC.S add-on module
Individual cables can be changed quickly without replacing the entire energy supply
Can be shortened or widened
No minimum order quantity
Flexible standard modular system, no special production
IPA ISO Class 1 chainflex cables with 36-month guarantee

Proof

IPA cleanroom Class 1 for the three-layered e-skin flat: Material/stranded structure* tested by IPA according to ISO 14644-14, report IG 2107-1242

*The following cables are listed in the certificate: CFCLEAN3.01.05.02 and CAPU.A.06.0 - Further tests are at present are not scheduled.

Sustainability

Have your energy recycled at the end of its life cycle in the igus Chainge recycling programme.

Suitable accessories

Spacer

Spacer for the mounting bracket. Compact design due to mounting bracket's lower height. Now available in three sizes: SP12, SP16 and SP20.

Cable chain with integrated smart plastics sensor for monitored cables.

e-skin® flat with support chain with ultrasonic sensor

i.Cee EC.S - new ultrasonic sensor on e-skin flat with support chain enables condition-based maintenance messages in the cleanroom.

e-skin flat cable chain with a bend radius of 70 to 100 mm.

e-skin flat SKF.S offers an unsupported length and a defined bend radius.

e-skin flat support chain with flexible cable guidance.

SKF.S e-skin® flat with support chain for the closed SKF12C single pod.

Compact linear bearing with carriage on guide rails.

Variable-width e-skin® mounting brackets available upon request. If desired, they can be stacked.

e-skin flat support chain module in a housing opening.

e-skin® flat with support chain as enclosed solution to prevent abrasion

e-skin flat singlepods for cleanroom environments.

e-skin flat profiles

Freely fillable cable guidance system. Particularly compact structure. Modular design with profiles that can be joined together.

e-skin cable protection system with Fraunhofer IPA test seal for moving cables.

More e-skin series

Securely and abrasion-resistant cable guidance in cleanrooms.

Go to e-skin overview

Cleanroom-compatible e-chain in front of a laboratory background.

Cleanroom energy chains

Discover more energy chains suitable for ISO Class 1 cleanroom applications here.

To the cleanroom energy chains

e-skin flat application example

Linear system with air bearings

igus e-skin flat SKF12.4.03.1.01 used in a linear system with air bearings. The e-skin flat has no minimum order quantity, shows almost no visible wear and tear and can be implemented in the smallest installation space.

Learn more