chainflex® bus cable CFBUS.PVC

Name: chainflex® bus cable CFBUS.PVC (CFBUS.PVC.001)
SKU: CFBUS.PVC.001
Price: 3.03 EUR
Availability: InStock

1 from 3

• Profibus

• For energy chain applications

• PVC outer jacket

• Bend factor 12.5xd

• Overall shield

• Oil-resistant & flame-retardant

• 10 million double strokes guaranteed

Guarantee up to 4 years

Part No.

CFBUS.PVC.001

Number of cores and conductor nominal cross-section

(2x0.25)C

Bus system

Profibus (1x2x0.64mm)

Outer jacket colour

Red lilac (comparable to RAL 4001)

Outer diameter (d) max. mm [mm]

Typical application areas

For medium-duty applications
Light oil influence
Preferably indoor applications, but also outdoor ones at temperatures > 5°C
Unsupported travel distances and up to 20m for gliding applications
Bus connection cables for storage and retrieval units, machining units/packaging machines, handling, indoor cranes

Guaranteed service life for this series according to guarantee conditions
Further information: chainflex® guarantee

Double strokes*	5 million	7.5 million	10 million
Temperature,	R min.	R min.	R min.
from/to [°C]	[Factor x d]	[Factor x d]	[Factor x d]
+5 / +15	15	16	17
+15 / +60	12.5	13.5	14.5
+60 / +70	15	16	17

* Higher number of double strokes possible - use the service life calculation function on this page.

Technical note on bus cables

chainflex® bus cables have been specially developed and tested for continuously moving use in e-chains® applications. Depending on the outer jacket material and the design principle, the bus cables are designed for different mechanical requirements and media resistance. The cables have been electrically designed in such a way that, on the one hand, the electrical requirements of the respective bus specification are reliably met and, on the other, that great value is placed on a high degree of EMC reliability. It is also ensured that the electrical values remain stable over the long term in spite of permanent movement. However, the overall quality of transmission in a complete bus communication system is not solely dependent on the cable used. Rather, it requires precise co-ordination of all components (electronic components,

connection technology and cable) as well as observing the maximum transmission levels depending on the respective systems in relation to the required data transmission rates. A cable is therefore not solely responsible for the secure transmission of signals.

igus® advises you when you are designing your bus system to take all these factors into account and, with extensive tests, helps you to ensure the process reliability of your system from the very beginning.

Certificates and standards