iglidur® G1 | The new lubrication-free standard
 

• More than 113 dimensions, others at short notice upon request
• Two times longer service life at high loads
• Up to 4 times lower wear at low loads
• Long-term service temperature up to +180°C
• Pressfit up to +120°C (iglidur® G: up to +80°C)
• Moisture absorption reduced by 50%

With iglidur® G1, we offer a wear-resistant and versatile material for a wide range of applications. Recommended are applications with medium to high loads at medium speeds. Even at increased temperatures of up to 180°C, iglidur® G1 is dimensionally stable and wear-resistant and offers very low moisture absorption. This makes iglidur® G1 suitable for a variety of different applications and is therefore an all-rounder with very good running performance.
 
Typical application areas
 
Automotive
Machine tools
Furniture/Industrial design
Electronic manufacturing
Fitness and sports
 
You can find further applications here:
Industry solutions
 

When to use it? Economical all-round performance bearing For low to average surface speeds When the bearing needs to run on different shaft materials For oscillating and rotational movements

When not to use it? When mechanical reaming of the wall surface is necessary iglidur® M250, sleeve bearing, mm When the highest wear resistance is required iglidur® W300, sleeve bearing, mm When universal resistance to chemicals is needed iglidur® X, sleeve bearing, mm If temperatures are constantly higher than +180°C iglidur® H, sleeve bearing, mm iglidur® X, sleeve bearing, mm iglidur® H370, sleeve bearing, mm For underwater use iglidur® H370, sleeve bearing, mm

Use our filter options to find the suitable product
 
Tolerances and measurement system
The installation dimensions and tolerances of the iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. The rule for wall thickness: the thicker the wall of the bearings, the larger the tolerances must be.
Testing methods
 
Assembly
iglidur® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the correctly toleranced housing The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are also prevented.
iglidur® - assembling, gluing, machining