iglidur® A500 | The endurance runner at higher temperatures in the food sector - Compliant with EU regulation 10/2011
- FDA-compliant
- Temperature resistant from -100 °C to +250 °C
- High chemical resistance
- Lubrication- and maintenance-free
- Standard range from stock
iglidur® A500 bearings are suitable for direct contact with foodstuffs. They exhibit an exceptionally good chemical resistance and are suitable for heavy-duty use in machinery for the food industry. Though iglidur® A500 is an extremely soft material, it possesses an excellent compressive strength even at high temperatures.
Typical application areas
Beverage industryFood industryMedical technology You can find further applications here:
Industry solutions When to use it?- When FDA-compliance is required
- When high chemical resistance is required
- When good abrasion resistance is required
- Temperature resistant from -100 °C to +250 °C
| When not to use it?- When highest wear resistance is needed
iglidur® X6, sleeve bearing with flange, mm iglidur® Z, sleeve bearing with flange, mm - If no resistance to temperature or chemicals is required
iglidur® A180, sleeve bearing with flange, mm iglidur® A200, sleeve bearing with flange, mm - When a cost-effective universal bearing is required
iglidur® G, sleeve bearing with flange, mm iglidur® P, sleeve bearing with flange, mm
|
Use our filter options to find the suitable product Tolerances and measurement systemThe installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods Assemblyiglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.
iglidur® - assembling, gluing, machining
Certificates and standards