Name: drylin® W chariot linéaire WW T15 Acier inoxydable (WW-10-30-T15-ES2-A160)
SKU: WW-10-30-T15-ES2-A160
Price: 120.02 EUR
Availability: InStock

Technologie linéaire

Guidages linéaires compacts W

Chariot

drylin® W chariot linéaire WW T15 Acier inoxydable

Demander notre livre blanc &quot;Quand utiliser des douille linéaire en polymères et quand utiliser des guidage linéaire à billes ?&quot; (en anglais)

Commandez ici votre box d’échantillons drylin W gratuite !

Besoin de plus amples informations ? Nous sommes là pour vous aider !

Tutoriels drylin® dryve D1 en ligne (films).

Calculez ici le supplément de cuivre au cours du jour pour votre calcul de prix des câbles.

Configure Do you want a ready-to-connect assembled energy chain, optionally with cables, or are you unsure whether the energy chain selected here is suitable for your application? Then use our e-chains® expert for selecting and calculating the right energy chain based on your application data.&nbsp;

Find the right coupling joint for
your application: just enter your requirements and receive suitable suggestions
.

Le nouveau système d'expertise xiros® pour rouleaux de renvoi recherche pour vous des rouleaux de renvoi xiros® adaptés et en calcule la flèche escomptée ainsi que le poids.

Couldn't find the right shaft? Then simply configure your shaft the way you want it to be!

Quickly find the perfect ball bearing for your application: simply enter your requirements and receive suitable ball bearings with a service life statement.&nbsp;

Il est possible de commander ici, en 3 minutes, des câbles sur mesure au prix du jour, à partir de 1.000 m.

Trouver en ligne, rapidement et simplement, des câbles confectionnés selon des standards fabricant et les commander.

The right drylin E motor in just a few clicks. Simply enter your requirements and receive suitable suggestions.

Video instructions for applications, commissioning and assistance with your motor control system

Les paramètres course, rayon de courbure et accélération vous fournissent la durée de vie du câble chainflex®.

<h3 style="text-align:start;">Do you require customised lead screw machining?</h3>
Configure quickly & easily online here.

Trouver une solution individuelle à partir de plus de 950 câbles et 3.500 connecteurs et la commander.

With the help of the inner separation configurator you can create a layout of the needed cables in the e-chain and get a feeling if there is enough space for every cable and where is the best position inside the e-chain.&nbsp;

Calculer en quelques clics la durée de vie estimée des rotules lisses igubal

Use the service life calculator to determine the service life of an energy chain.&nbsp;

Customised processing of machined end without CAD software, 2D drawing and 3D step file, generated online, immediate price calculation, order online right away or request a quote&nbsp;&nbsp;

Product selection and service life calculation. By entering application parameters, you get the expected service life for iglidur® plain bearings.

Help with selecting the ideal lead screw drive for your application, service life calculation for desired lead screw drive configuration, PDF download with all details about required application.&nbsp;

Can't find the right size? Simply configure here!

Des restes de différents types de câbles disponibles en différentes longueurs à des prix intéressants.

With just a few clicks, you can put together a complete linear axis including motor, connection cables and built-on parts.

Missing something? Then simply configure your desired solution yourself. Use our configurator!

The iglidur® Bearing Designer enables you to display price breaks for plain bearings in your individual dimensions and preferred material in just a few steps. At the end you will receive a technical drawing of your individual plain bearing if desired and can order it right away or request further information from us.&nbsp;

Unsure if it fits? Simply configure online with our roller bearing configurator

Save time and money with free sample programs for your motor control system

Il suffit de saisir les paramètres de l'application pour trouver en quelques clics des plateaux tournants adaptés et obtenir leur durée de vie escomptée.

Service fabrication pour pièces sur mesure en matériaux iglidur®.

Easily find the perfect solution for your applications: enter your requirements and receive the suitable configuration.&nbsp;&nbsp;

Trouver rapidement le matériau iglidur® adapté. L'outil de recherche iglidur® vous indique en quelques clics le palier lisse iglidur® adapté à votre application.

The Quickrobot is the easiest and fasted way to get with only a few clicks a complete dresspack for several robot manufacturers and types.&nbsp;

La recherche de produits vous fournit un aperçu rapide de tous les câbles chainflex® entrant en ligne de compte pour votre application.

Test our motor control system online with the free browser application.


Very good coefficient of friction for low or medium loads
Higher temperature resistance up to 120 °C



attributes_iglidur_q2e_material_description


Versatile use: good combination of high wear resistance, strength and temperature resistance
Colour: black

Self-lubricating filament iglidur i180  in black colour
Components made from the 3D printing material iglidur i180-BL can be used universally for all types of wear-resistant parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications
If a black material is required

When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260) 




High wear-resistance and maximum stability
Good mechanical properties
Accurate surface details
For sliding applications and gears


Selective laser sintering (SLS) material: iglidur i3
The iglidur i3 material, specially developed for laser sintering, showed an abrasion resistance 3 to 30 times better than conventional materials for laser sintering in the tribological tests in the igus® test laboratory. As a result, the degrees of freedom are further increased when designing wear-stressed sliding components. It is used for  all  sliding applications, as well as rollers, racks, spur gears and bevel gears.

When to use it?

For all types of applications where low friction and high wear resistance are important
When components with high mechanical strength are required, in particular spur gears, bevel gears, drive nuts, special slides and spherical bearings
Very good wear properties with anodised aluminium as a counter partner

When not to use it?

For use under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
For worm gear applications (→ iglidur i6)
If a food grade material is required (→ iglidur i6)
If components with higher elasticity are required (→ iglidur i10)
If the application temperature is higher than 80 °C in the long term (→ iglidur i230 or iglidur A350 or iglidur RW370)




Electrostatically dissipative (ESD), without interference currents in live parts
Contact resistance 10^6 – 10^9 Ohm x cm
Increased rigidity
Colour: black (continuous)


Selective laser sintering (SLS) material: iglidur i9-ESD
The laser sintering powder iglidur i9-ESD has a electrical resistance of 10^6 to 10^9 Ohm. This makes it electrostatically dissipative (ESD), and at the same time reduces the risk of unwanted discharge currents between sensitive, electrical components. This makes it ideal for applications in the electronics and semiconductor industries, and especially for electronic connectors.

When to use it?

When antistatic components with medium conductivity are needed
For applications under water or with high humidity
When components with high stiffness are required
When components with high UV resistance are required
When black components are required

When not to use it?

If I need ESD parts with better conductivity (→ iglidur i8-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food grade material (→ iglidur i6 or iglidur i6-BLUE)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)




Food compliant according to FDA
Blue colour for optical detectability
Excellent abrasion resistance and toughness
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6-BLUE
The iglidur i6-BLUE material, developed for laser sintering, is specifically intended for use as a worm wheel, and for food contact. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM - This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6-BLUE is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food-compliant material in a continuous blue colour is required (optical detectability)
For applications with sliding motion, especially for worm gears

When not to use it?

For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



Bearings of so-called tracking systems in photovoltaic systems defy particularly adverse environmental conditions. iglidur P UV was developed for this area of application. The special composition ensures high resistance to ultraviolet rays and ensures that components made of iglidur P UV function for a particularly long time and with the least possible loss of strength. 


attributes_iglidur_hlw_material_description

iglidur® A160 | FDA and EU regulation-compliant for chemicals and food
iglidur® A160 is characterised by extreme media resistance at low costs. Tribologically optimised, the material can be used up to +90°C and also meets the conformity requirements of the food processing sector. The property profile is rounded off by the &#34;optical detectability&#34; often desired in the industry, i.e. the blue colour.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When a material with maximum media resistance is required
When a cost-effective material with high media resistance is required
When a material conforming to the 10/2011 EC is required

When not to use it?

When a universal material is needed for the food industry
If a very media-resistant material is sought for applications at more than +90°C
When a low-cost material with high wear resistance in dry operation is required



iglidur® A500 | The endurance runner at higher temperatures in the food sector
iglidur® A500 is approved for direct contact with food. It has an exceptionally good chemical resistance and is ideal for the most difficult applications of machines for the food industry. Although iglidur® A500 is a very soft material, it also has an excellent compressive strength, even at high temperatures.

Typical applications

Beverage industry
Food industry
Medical technology


When to use it?

When FDA compliance is required
When a high chemical resistance is required
When good abrasion resistance is required
Temperature-resistant from -100°C to +250°C

When not to use it?

When extreme wear resistance is required
When high temperature and chemical resistance is not required
When a cost-effective universal material is sought



iglidur® M250 | The robust all-rounder with outstanding vibration damping
The self-lubricating material iglidur® M250 is particularly characterized by impact strength, vibration damping and wear resistance. It proves itself particularly well under stresses where a vibration-damping function of the material is required, e.g. in sports equipment and packaging machines. As it is also capable of embedding dirt, it is also suitable for agricultural machinery and gardening equipment.

Typical areas of application

agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

When the material is exposed to heavy soiling
For excellent vibration damping
At low to medium speeds
When mechanical reworking is required
Insensitive to edge pressure
High impact strength
Thick wall thicknesses according to DIN 1850

When should I not use it?

For applications in wet areas
When very high precision is required
For very smooth shafts
When a cost-effective material with maximum wear resistance is required



iglidur® F2 | ESD-suitable, wear-resistant and dissipative
iglidur® F2 helps to avoid electrostatic charging. Good media and temperature resistance, suitable even in wet conditions due to low moisture absorption and good universal wear values in a wide range of applications.

Typical applications

Machine tools
Robotics


When to use it?

When the material should be electrically discharging
When an universal material is required

When not to use it?

When an universal material without static dissipation capability is required
For underwater use
When extreme wear resistance is required



Iglidur® Q290 | medium to high loads, especially on soft shafts
iglidur® Q290 shows excellent service life in robust swivel applications, such as those frequently encountered in agricultural machinery, especially on “soft” shafts (e.g. galvanized). The stress on the shafts is also minimal.

Typical areas of application

Agricultural technology
Construction machinery


When do I use it?

When a durable material is required for robust
operating conditions (agriculture, construction machinery, ...)
with medium to high dynamic loads
on “soft” shafts is required

When should I not use it?

If permanent static loads greater than 55 MPa occur
If a very wear-resistant material is required on “soft” shafts
is required for low loads
If temperatures greater than +140 °C occur permanently 



attributes_iglidur_m210_material_description

iglidur® J2 | Environmentally friendly, versatile and cost-effective
iglidur® J2 has a good universal media resistance comparable to iglidur® J and similar materials. The mechanical specifications in sporadically moving applications are better, but in comparison there are significant reductions in friction and wear. Like all iglidur® materials, iglidur® J2 is PFOA-free.

Typical applications

Model building
Robotics


When to use it?

When low moisture absorption and good media resistance is required for static load
When a cost-effective plain bearing is required for use in a wet environment with low pv values
When there is basic lubrication of the bearing

When not to use it?

When a highly wear-resistant bearing is required for continuous dry operation
When low moisture absorption and media resistance play a minor role
When resistance to high temperatures and chemicals is required



iglidur® J3 | The new endurance runner: specialist for pivoting loads
iglidur® J3 is a material with improved wear resistance at low to medium loads and high speeds. The service life is up to 300% higher than that of iglidur® J, the proven top endurance runner material.

Typical application areas

Vending machinery
Printing industry
Beverage industry
Glass industry
Aviation


When to use it?

When optimising wear resistance compared to iglidur® J
When very low coefficients of friction in dry operation are required
When high wear resistance at low loads is required
When low moisture absorption is fundamental
When good liquid media resistance is required

When not to use it?

When a wear-resistant material is required for linear strokes
When continuous operating temperatures are higher than +90°C 
When radial surface pressure is higher than 45MPa



attributes_iglidur_l100_material_description

iglidur® W360 | Endurance runner with all-round profile
The iglidur® material W360 combines excellent endurance properties with high temperature resistance, reduced moisture absorption and good price/performance ratio - a genuine all-rounder in the endurance sector.Typical applications

Vending machinery
Automotive
Motor bikes &amp; ScootersWhen to use it?
When an extremely wear-resistant material is required for medium loads
When regular contact with moisture occurs
When continuous operating temperatures are higher than +90°C


When not to use it?

When a wear-resistant material is sought for the standard temperature range and low to medium loads
When maximum temperature resistance and high wear resistance is required
When the highest wear resistance under water is required 



attributes_igutex_tx3_material_description

attributes_iglidur_p4_material_description

The special feature of iglidur AX500 is that it is a conductive material. In addition, AX500 has an even lower wear value than its predecessor. The material was developed especially for the food industry and can therefore be used in contact with food without any problems.


 iglidur® H3 | Tough, wear-resistant, durable
With iglidur® H3 there is a new material in the iglidur H family. H3 sets new standards with its high durability. This material is tougher than comparable materials and achieves a longer service life than iglidur H1. iglidur H3 was developed primarily for use in pumps and demanding media and shines with its low moisture absorption. 
 


iglidur® Z | Longest service life under extreme conditions - Wear-resistant &amp; impact-resistant even under high loads and temperatures
Highest compressive strength, coupled with high elasticity, gives iglidur® Z its outstanding properties in connection with soft shafts, edge loads and impacts. At the same time, the bearings are suitable for temperatures up to +250 °C.

Typical areas of application

Construction machinery
Glass industry
aerospace industry
Mechanical engineering
Textile industry


When do I use it?

At temperatures up to +250 °C, continuous; or +310 °C, short-term
When high wear resistance is required, especially under high radial loads
For high sliding speeds
For edge pressure in conjunction with higher surface pressures

When should I not use it?

For low loads and temperatures
When an inexpensive all-round material is required
When an electrically conductive material is needed



iglidur® H2 | Low cost, for high temperaturesWhen using iglidur® H2, economic aspects are in the focus. It is the first time that it is possible to offer such a high-performance material for high volume applications with these technical advantages at such a cost-effective price: temperatures up to +200°C, permitted surface pressure up to 110N/mm², and excellent chemical resistance. The iglidur® H2 material is self-lubricating and suitable for all motions.Typical applications

Automotive 


When to use it?

For use under water
When a cost-effective material is required for use at high temperatures
For applications with fuels, oils, etc.
Resistant to chemicals


When not to use it?

When extreme wear resistance is required
When vibration dampening is required
When neither increased temperatures nor media contact occur 



iglidur® C500 | High media and temperature resistance, up to +250°C, wear-resistant
iglidur® C500 can be used in applications up to +250°C and is extremely media-resistant (such as in cleaning processes with hydrogen peroxide), wear-resistant and has low coefficients of friction. Also suitable for various special designs. The colour shows the use under extreme environmental influences.

Typical applications

Automotive
Glass industry
Food industry
Machine tools
Heavy machinery / Plant construction


When to use it?

When an extremely media-resistant material with high flexibility is required
When you need a highly wear-resistant and media-resistant material

When not to use it?

When an FDA-compliant high temperature material is required
When you need a media-resistant, high-temperature material with the largest possible range of dimensions



iglidur® HSD350 | Media-resistant and hygienic at low costs
The new material enables continuous use where hygiene is important, including regular sterilisation, with an outstanding price/performance ratio.

Typical application areas

Fluid technology
Medical technology


When to use it?

When the bearing point is regularly sterilised using hot steam
When a low-cost material is needed at the same time
When good chemical resistance is required
Low moisture absorption

When not to use it?

When high pressure loads occur
When short-term temperatures higher than +120°C occur
When a cost-effective material for occasional movements is necessary



iglidur® C | Free from PTFE and silicone, good abrasion resistance
iglidur® C was developed especially for applications where the use of PTFE and silicone is not possible. Such applications can be found in the electronics, tobacco and beverages industries, as well as many painting processes. Keywords like paint compatibility and silicone-free make it useful to study this material more closely. 

Dry operation
Good abrasion resistance
Lubrication- and maintenance-free


When to use it?

When PTFE and silicone are not allowed in the application
For applications with low speed
If dirt-resistant materials are required
If maintenance-free, self-lubricating materials are needed


When not to use it?

When highest wear resistance is needed
When lowest coefficients of friction are required
If a cost-effective option is requested
When low moisture absorption is required 



attributes_iglidur_eco_g_material_description

iglidur® G | The all-rounder
The widest range of different requirements is covered by iglidur® G. Therefore, the material is rightly called universal. Typical applications include medium to high loads, medium surface speeds and medium temperatures. iglidur® G is the decathlete among iglidur® materials. It performs very well in all technical disciplines and is the classic all-rounder, primarily with respect to the overall general, mechanical, thermal and tribological specifications.

Typical areas of application

Agriculture
Automotive
Construction machinery
Machine tools
Fitness and sports


When to use it?

When an economical all-round performance material is required
For low to average surface speeds
When the material needs to run on different shaft materials
For pivoting and rotational movements

When not to use it?

When mechanical rework is required
When the highest wear resistance is required
When universal chemical resistance is required
When temperatures are continuously greater than +130°C
When used under water



iglidur® Q2 | The durable heavy-duty material
iglidur® Q2 stands for high load-bearing capacity and good abrasion resistance under high loads. The price-performance ratio is outstanding. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to other iglidur® materials, especially for highly loaded swivel applications.

Typical areas of application

Agricultural technology
Construction machinery
Mechanical engineering


When do I use it?

When high dynamic loads occur
If, in addition to high loads, shocks, impacts and dirt occur
For highly loaded swivel applications

When do I not use it?

If only static loads occur
When high pv values occur at high speeds
If an inexpensive all-rounder material is required
When soft shafts are used



The ECO group includes iglidur materials that are made from at least 97% regranulate. Due to the production from already processed raw materials, they are particularly sustainable.
iglidur® ECO H - For highly corrosive and hot environments

Suitable for extremely high speeds
Very low moisture absorption
Good wear resistance under water
Very high media resistance
Resistant to high loads (&gt;60 N/mm²)  



iglidur® J200 | Specifically for aluminium shafts
iglidur® J200 is the result of the development of particularly low-friction materials. When using it in linear motion, friction can be critical. Many materials can give low coefficients of friction under high loads, but this material can give excellent coefficients of friction even at low loads.

Typical applications

Vending machinery


When to use it?

For applications with anodised shafts
When lowest coefficient of friction is required
When long service life at low loads is required

When not to use it?

When steel shafts are provided
When continuous operating temperatures are higher than +90°C
When a cost-effective universal material is sought



iglidur® GLW | Low-cost material for large volumes
With iglidur® GLW we can offer our customers an alternative to iglidur® G for large series applications. Featuring similar mechanical properties as iglidur® G, iglidur® GLW is primarily recommended for static loads. These applications, where the properties of iglidur® G are unimportant to a degree , iglidur® GLW presents a cost-effective alternative.

Typical applications

Automotive
Machine tools
Robotics


When to use it?

When an economical universal material for high volumes is required
For high, primarily static loads
For low to medium speeds

When not to use it?

When mechanical reworking of the wall surface is required
For primarily dynamic loads
When extreme wear resistance is required
For use under water



 iglidur® J260 | Ideal for plastic shafts 
The material iglidur® J260 proves itself again and again where the highest service life and coefficients of friction are required - especially in connection with plastic shafts! iglidur® J260 is similar to iglidur® J, an endurance runner with excellent wear properies, whereby the upper long-term application temperature of +120°C offers more reserves. 
  
Typical applications  

Vending machinery 
Machine tools 
Robotics 

  
When to use it? 

When polymer shafts are used 
When the temperature rating of iglidur® J is notsufficient 
When a material with low coefficient of friction isrequired 
When high wear resistance is required at medium loads 
When good liquid media resistance is required 

When not to use it? 

When high surface pressures occur
When continuous operating temperatures are higher than+120°C
When universal wear resistance is required 



iglidur® N54 | The biopolymer, based on renewable raw materials
iglidur® N54 is the first iglidur® material that is largely based on biopolymers. In addition to the fact that all iglidur® materials are already lubricant-free, this is a further step towards a positive environmental balance. Good coefficients of friction paired with service lives that allow series use in sporadically moving applications give this material a firm place in the iglidur® program.

Typical areas of application

Mechanical engineering
Furniture / industrial design


When do I use it?

For sporadically moving applications with low to medium loads
For quasi-static loads
When the environmental balance of a product needs to be optimized

When do I not use it?

When a universal standard material is required
When there is a high frequency of movement and continuous operation
When elevated temperatures are present



iglidur® W300 | The endurance classic, very wear-resistant on (almost) all shafts
iglidur® W300 offers high wear resistance, even in rough shafts or very abrasive ambient media. This material is the most tolerant of these external effects out of all the iglidur® range.

Typical applications

Vending machinery
Printing industry
Wood industry
Machine tools


 When to use it?

When especially high service life is necessary
When low coefficient of dynamic friction and high wear resistance are required
For use on 304 stainless steel shafts
For harsh environments and rough shafts
Dirt-resistant


When not to use it?

For high loads from 50 MPa
When temperatures continuously greater than +90 °C are present
For very wet environments
When an exceptionally economical material is desired 



iglidur® P | The favorable outdoor all-rounder - No swelling even with high ambient humidity
Due to its thermal stability and low water absorption, iglidur® P is one of the most dimensionally stable all-rounder materials for changing ambient conditions. iglidur® P is recommended for swivel and rotational movements with medium loads.

Typical areas of application

Mechanical engineering
Furniture / industrial design
Solar technology
Sports, fitness &amp; rehab
Traffic engineering


When do I use it?

When low moisture absorption is required
When a cost-effective material for high pressure loads is required
When higher precision is required in damp and medium temperatures

When do I not use it?

When mechanical reworking is required
When maximum wear resistance is required



iglidur® A180 | The FDA-compliant all-rounder
iglidur® A180 is suitable for use in direct contact with food. It is therefore the ideal solution for bearing points on machines for the food and packaging industry, medical equipment manufacturing and small household appliances, etc. Even where wet cleaning or process-related contact with moist media is the order of the day, iglidur® A180 is characterised by minimal moisture absorption.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When the material has direct contact with food
When FDA compliance is required
When a low noise level is required
When low moisture absorption is fundamental

When not to use it?

When only the highest wear resistance is required
When temperatures permanently higher than +80°C occur
When an inexpensive universal bearing is sought



iglidur® T220 | For the tobacco industry, FDA-compliant
iglidur® T220 is a special material for use in the tobacco processing industry. It fulfills the requirements of the tobacco industry (engineering database). The material is free of undesirable or prohibited ingredients, as required by renowned manufacturers of tobacco products as of 2004, and contains no carcinogenic additives such as PTFE.

Typical areas of application

Tobacco processing industry


When do I use it?

If the material needs to be free from ingredients that are undesirable or prohibited in the tobacco industry
When FDA conformity is required

When not to use it?

When high surface pressures occur
When an inexpensive all-round material is required
When maximum wear resistance at low pressure loads is required
If only freedom from PTFE and silicone is required 



attributes_iglidur_ecop210_material_description

attributes_iglidur_uw_material_description

Specially developed for the food sector, iglidur® A230 is particularly suitable for machines and systems with food contact due to its optically easily detectable color, low moisture absorption and conformity according to FDA and EU10/2011 directive. 




Flexural strength up to 80 MPa, best iglidur filament
Excellent service life - 50 times higher abrasion resistance than ABS


Flexible and wear-resistant filament - iglidur i190
iglidur i190 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed on regular 3D printers, but a closed 3D printer is recommended. Due to its high wear resistance and excellent mechanical specifications (strength, toughness, coating adhesion), it is an all-round material that is suitable for most applications and 3D printers. Of all igus tribofilaments, only iglidur RW370 has a higher strength than iglidur i190. It can also withstand a long-term application temperature of up to 90 °C (after tempering the component).

When to use it?

For all types of applications where low friction and high wear resistance are important
When higher strengths are required

When not to use it?

If the application temperature is higher than 90 °C in the long term (→ iglidur J260 or iglidur RW370)
For applications under water or with high humidity (→ iglidur i180)
If the application requires a food grade material (→ iglidur i150 or iglidur A350)



Die Werkstoffe der ECON-Serie, iglidur J4, GLW, P4, PLW210, ALW350, HLW und NEU: Q2LW sind nicht nur für viele Anwendungsbereiche bestens geeignet, sondern nun auch im europäischen Markt in Standardabmessungen verfügbar.  
Vorteile: 

Universell einsetzbar
Varianten für hohe Temperaturen
Lebensmitteleinsatz und Verschleißfestigkeit verfügbar
Kostengünstig, besonders bei größeren Stückzahlen
Ca. 50 % reduzierter CO2-Fußabdruck  




Food compliant according to EU Regulation 10/2011
High abrasion resistance at low surface speeds 


Easy-to-process, abrasion-resistant filament - suitable for food contactiglidur i150 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed just as easily as standard PLA and PETG filaments. Due to its high wear resistance and good mechanical properties (strength, toughness, layer adhesion), it is an all-rounder material that is suitable for most applications and 3D printers. This makes it by far the most frequently used igus filament. There are restrictions only in terms of the maximum permanent application temperature of 65°C and for highly dynamic applications.Furthermore, it is suitable for food contact due to the conformity according to EU 10/2011 and is therefore ideal in applications in the food and packaging industry.  


iglidur® PEP - for all shaft surfaces and materials 
iglidur® PEP consists of a combination of two plastic layers. Even threads, rust or scratches do not impair the permanently reliable function. 


drylin® W chariot linéaire WW T15 Acier inoxydable

Description du produit

Données techniques

Téléchargements