iglidur® L500, sleeve bearing, mm - L500SM

iglidur® L500 | For extreme rotational speeds
iglidur® L500 is a plain bearing material for high speeds, fast sliding movements with low loads. Due to the low thermal expansion and low moisture absorption, bearings can be manufactured with very little clearance. Applications featuring these advantages are fans, small motors, fast-running sensors or the magnet technology.

Typical application areas

Automotive

Mechanical engineering

Here you will find further possible applications:
Industry solutions
 

When to use it? For rotating applications at high speed When the highest service life is required For high pv values with low loads At operating temperatures up to +250°C (permanent, short-term up to max. +350°C)

When not to use it? When an universal bearing for high temperatures is required iglidur® X, sleeve bearing, mm When medium to high pressure loads occur iglidur® G, sleeve bearing, mm iglidur® Q, sleeve bearing, mm For pivoting applications iglidur® W300, sleeve bearing, mm iglidur® J350, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining