iglidur® X | The chemical and temperature specialist, up to 150 MPa static - Over 250 dimensions available from stock
- Temperature resistant from -100 °C to +250 °C in continuous operation
- Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- Universal chemical resistance
- High compressive strength
- Very low moisture absorption
- Excellent wear resistance through the entire temperature range
iglidur® X is defined by its combination of very high temperature resistance with high compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
Typical application areas
Beverage industryWood industryPlastic machinesAviationCleanroom You can find further applications here:
Industry solutions When to use it?- For pressure loads up to 150 MPa
- For linear movements with stainless steel shafts at high temperatures
- Universal chemical resistance
- Temperature resistant from -100 °C to +250 °C in continuous operation (short-term to +315 °C)
- Very low moisture absorption
- For high wear resistance over the entire temperature range
| When not to use it?- When low coefficients of wear under high loads are decisive
iglidur® Q, sleeve bearing, mm iglidur® Z, sleeve bearing, mm - When a cost-effective bearing for underwater use is required
iglidur® H, sleeve bearing, mm iglidur® H370, sleeve bearing, mm - For edge loads
iglidur® Z, sleeve bearing, mm
|
Use our filter options to find the suitable product Tolerances and measurement systemThe installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods Assemblyiglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.
iglidur® - assembling, gluing, machining
Certificates and standards