igubal® flange bearing EFOM
With 2 mounting holes
igubal® flange bearings were developed for the bearing of shaft ends or shaft bushings. Like all igubal® products, it consists of a housing made of igumid G and a spherical ball in iglidur® W300. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes.
Due to the fact that igubal® flange bearings are suitable for dry operation, they are worth considering in particular for applications in which the installation site is difficult to access, in a humid or wet environment or when there are special hygiene demands. As a result, igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in material handling technology and in bakery equipment.
igubal® flange bearings are designed for mounting with 2 or 4 screws, depending on the design. The 2-hole types are provided with elongated holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error.
igubal® flange bearings with 2 and 4 mounting holes are available in standard dimensions for shafts that are 5 to 50 mm. Please ask us for other delivery times and for additional flange bearing dimensions.
When chemical resistance is required
When a low-cost alternative is desired
When dirt-resistant bearings are needed
When misalignments should be compensated
When fully split components are needed
When temperatures above +200°C prevail
When an integrated collar is required
When dimensions over 50 mm are needed
When rotation speeds in excess of 0.5 m/s should be implemented