1. Sealed and universal:
enclosed KMA mounting bracket
with attachment from any side
Chips cannot stick
3. Quick assembly:
lid openable from both sides
4. Integrated grid structure: ideal for
90° rotating applications
5. Protected: covered pin/bore connection
6. Low noise operation: due to built-in brake
7. Lightweight with
large inner height:
good ratio of outer to
dog system for large
* The required clearance height is HF = H + 40 mm (with 2.0 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=moving end, B=fixed endPitch: 48 mmLinks per m: 21Travel: STube length= S/2 + K
The unsupported length depends on fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run Graph values are provisional.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Separators
Option 1 - SeparatorsSeparators can be placed anywhere in the chain's cross-section to divide the interior of the e-chain® - As standard, separators are fitted every 2nd chain link!
R2.40.2 Standard - Wide on one side for high holding strength, narrow on opposite side for easy cable fitting.
3200.X Horizontal division
Locks in securely at both ends of the separator,
secure width fixing possible. Can be used as full-width shelf for
integrated subdivision or as partial shelf
KMA - pivoting
KMA - one end pivoting
KMA - locking
Data protection declaration