zipper ESD e-chains® deliver in terms of practicality and performance. The zipper function makes them a very useful product to reduce assembly time. The small pitch, the tough-elastic zipper-band, and the sturdy link work well in high acceleration applications. The zipper series is one of the most popular igus® e-chain® series for demanding industrial sectors.
Available inner widths Bi: 10 to 50mmAvailable bend radii R: 18, 28, 38mmPitch: 20mm/link = 50 links/m
* The required clearance height is HF = H + 10 mm (at 0.2 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 20mmChain links per m: 50Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run The diagrams for unsupported lengths apply to standard e-chains® made of igumid GLW material. The values can also be used for assessing e-chain® applications in ESD special material. If the respective maximum unsupported length exceeds 80%, the suitability of the e-chain® should be verified by a practical test.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without clamp
Zip-on chain - Lids on a strip
6 widths, 3 bend radii
Other installation types
Plastic - one-sided
060.06.12 - 060.20.12: only middle holes060.30.12 - 060.64.12: only outer holes
Data protection declaration