The ESD E4.1 system combines all the advantages of its three predecessors and is the best system in the igus® range of e-chains®. Series E4.1 is stronger whilst having the same or even smaller dimensions than previous versions. Almost all accessories and mounting dimensions are identical. Increase the service life of your application with the igus® system E4.1 whilst reducing cost.
Inner widths Bi: 30 to 80 mmBend radii R: 48 to 100 mmPitch: 30.5 mm per link = 33 links/m(1007mm)
* The required clearance height is HF = H + 30 mm (at 1.5 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=moving end, B=fixed endPitch: 30.5 mmChain links per m: 33Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run The diagrams for unsupported lengths apply to standard e-chains® made of igumid GLW material. The values can also be used for assessing e-chain® applications in ESD special material. If the respective maximum unsupported length exceeds 80%, the suitability of the e-chain® should be verified by a practical test.
From 10 m to max. 120 mChain length = S/2+K2Long travel - gliding (up to max. 120 m) Here the e-chain® is used with the upper run gliding on the lower run. We recommend letting our engineers support you when planning this type of system. In case of travel lengths between 4.0m and 10m, we recommend a larger unsupported e-chain®. A1 = moving endA2 = fixed end A3 = Guide trough with glide bar A4 = Guide trough without glide bar A5 = Total length of the guide trough
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Integrated mounting system
5 widths and 4 bend radii
e-chain® opener tools for easy opening and closing of E4 series igus® e-chains®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: standard
Option 1: Standard ESD separator
For all applications. Provides maximum retention force and secure stability. As standard separators should be fitted every 2nd e-chain® link. Other shelving elements available upon request.
Plastic - pivoting
The standard - plastic, one end pivoting
"Super-aluminium", "Basic" guide trough
1. Trough side part, aluminium, 2m
2. Glide bar, plastic, 2m
3. Plastic glide strips*, side, 2m
4. Clamping shoe, aluminium
5. C-profile, galvanised steel
6. Screw M6 x 16
7. Sliding nut M6
8. "Basic" connector, plastic
*without glide strips upon request
"Super-aluminium" trough - the igus® standard for guide troughs
The "Super-aluminium" trough is a modular system of guide troughs for long travels (where e-chains® glide on each other). The basic "Super-aluminium" trough is available in simple, cost-effective "basic designs" and can be expanded for sophisticated plant construction. This universal usability makes it the recommended igus® standard for guide troughs.
1. Interface connector
2. Plastic glide bar
3. Clamping shoe
4. Glide strips
Support tray - Type 01
Data protection declaration