Series RX.48

Here you can configure your e-chain system® individually. All entries and changes are taking over to the part list which is situated at the end of the page.

Series RX. 48 - tube, openable along the outer radius

1. Chip-proof design without undercuts or edges
2. Rounded contour
3. Large capacity with max. 62 mm inner height
4. covered pin and bore connection and stop-dogs
5. "RBR" version available with reverse bend radius as standard
6. Lid can be removed on the outer radius
7. Mounting bracket with strain relief option
8. Interior separation available
9. Guide trough available

RX48 Series is suitable for the following types of applications:

Vertical: hanging applications, standing applications
Horizontal: unsupported applications ≤ 1,8 m, gliding applications
Rotary: rotary applications possible, may require machining (machining rework is always required from rotation angles of 180°)

When to use series RX. 48

If an extremely chip-proof, small e-tube without undercuts or edges with 62 mm interior height is required
Inner width 120 mm
For unsupported lengths up to 2,4 m and fill weights up to 12,0 kg/m
If easy access from outside is required

When not to use series RX. 48

If higher stability is required
Series R4.42
When no chip protection is required
Series E6.62

Installation dimensions


Part No. :
Inner width Bi [mm]:
Bending radius R [mm]:
Travel distance S [mm]:
Fixed end dM [mm]:
Chain length^** [mm]:
Number of chain links :
External width Ba [mm]:
H^* [mm]:
D [mm]:
K [mm]:
Hi [mm]:
Ha [mm]:
Weight per link [g]:
Weight [kg/m]:
* The required clearance height is HF = H + 50 mm (with 0,5 kg/m fill weight), this should be taken into account for all application types. Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.

A=Moving end, B=Fixed end
Pitch: 48 mm per link
Chain links per m: 21
Travel: S
Chain length = S/2 + K

Unsupported length

Unsupported length versus fill weight
X axis: Unsupported length in m FLB/FLG
Y axis: Fill weight in kg/m
Lower scale: Travel S in m
FLB = Unsupported with permissible sag
FLG = Unsupported with straight upper run

Reference example A:
Fill weight = 5,0 [kg/m]
Unsupported length FLB = 1,5 m
Travel = 3,0 m

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-Chain® Expert call Service life calculation PDF file Ask the product expert

Designing with igus®

Simple opening of the lid on the outer radius with contoured eccentric closure

1 width and 9 bend radii

RX e-tubes to withstand 850°C hot chips, as a special option.

Design specificationFurther information on "unsupported application"

Design specificationFurther information on "gliding application"

Assembly instructions

Technical specifications

Strain reliefs

Interior separation

1. Separators

2. Shelves

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:

Option 1 - Slotted separators
Vertical division of the interior space with cable-friendly plastic separators. Due to their slots, basic vertical/horizontal shelving arrangements are possible. As standard, igus® separators are assembled every second e-chain® link!

Part no. RX48.1 (centre position) and part no. RX48.2 (outer positions)

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Width [mm]:
Part No. :

Pc. Add to part list

Online Services:

Option 2 - Full-width shelves
Vertical division of the large filling space with cable-friendly plastic separators. Due to their slots, basic vertical/horizontal shelving arrangements are possible. As standard, igus® separators are assembled every second e-chain® link!

Part no. RX48.1 (centre position) and part no. RX48.2 (outer positions)

Horizontal division
Locks securely into separators at both ends, giving a fixed width. Can be used as full-width shelf for integrated subdivision or as a partial shelf for separation on one level.

Mounting brackets

Polymer

unassembled	assembled

	Universal mounting with flange attachment option
	Mounting bracket (optionally available with strain relief)
	Perfect connection with flange mounting brackets
	Easy to open
	Optional: M6 threaded bushings


:
Part No. :
A [mm]:
B [mm]:
C [mm]:
D [mm]:
Number of teeth :
No. of teeth [mm]:

Strain reliefs

Part List

Personal contact

GToB Imprint General notes Data protection declaration

Material of chain links	Igumid G
Min. permissible temperature [°C]	-40
Max. permissible temperature [°C]	120
Flammability class of chain link	VDE 0304 IIC UL94 HB

Series RX.48

Series RX. 48 - tube, openable along the outer radius

Installation dimensions

Unsupported length

Long travels

Technical specifications

Interior separation

Product range

Product range

Mounting brackets

Part List